GoCode Ford Transit High Roof Full Interior Trim Kit

Standard / No Audio

$1,062.50 USD $1,250.00 USD

GoCode Ford Transit High Roof Full Interior Trim Kit

GoCode

GoCode Ford Transit High Roof Full Interior Trim Kit

$1,062.50 USD $1,250.00 USD

Material

Audio Enhancement

Knock out the most challenging transition areas of your interior build in one shot with the GoCode Ford Transit High Roof Full Interior Trim Kit. This comprehensive 6-piece kit includes your B-pillar covers, center bulkhead, and rear D-pillar covers to finish every major transition in your van at once—completely handling the front foam "blobs," the complex compound curve behind the cab, and the rear door threshold. Engineered by GoCode to replace days of tedious custom carpentry and upholstery work, this kit provides a clean, professional finish that installs in under an hour.

Complete 6-Piece Interior Solution: Covers every major transition zone in your van, combining the driver and passenger B-pillar covers, the center bulkhead transition piece, and the 3-piece rear D-pillar kit.
Bridge the Compound Curve: The center bulkhead piece seamlessly connects the cab headliner to your cargo area, keeping ceiling panels of varying depths (1/4" to 3") completely on plane.
Cover the Factory Foam: Encapsulates the factory foam B-pillars directly behind the front cab seats for a finished, clean look without modification.
Conceals Factory Wiring: Routes and hides the exposed black factory wire harness safely out of sight behind the rear D-pillar panels.
Heavy-Duty Construction: Formed from durable 3/16" ABS haircell plastic, built to withstand the rigors of daily van life.

Make & Model: Ford Transit Cargo and Passenger vans (Model years 2015 to present).
Roof Height: High Roof models only.
Placement: Full interior transition coverage, including the front upper B-pillars, front bulkhead, and the rear cargo door threshold/D-pillars.

[2] B-Pillar Blob Covers (Driver and Passenger sides)

[1] Center Bulkhead Transition Trim Piece

[3] D-Pillar Rear Trim Pieces (Overhead threshold and both vertical side panels)

[1] Complete Installation Hardware Kit

Finish Options: Available in Standard Raw ABS plastic, Painted (SEM Ultra Black matte finish), or Upholstered in premium Marathon Tweed fabric (Grey Heather, Black, or Toast).

Audio Enhancement Options (B-Pillars):

No Audio: Solid, un-cut blank panels for stock van layouts.
Audio (with 4" Infinity Reference Speakers): Includes pre-installed 4" Infinity Reference speakers and integrated grille covers.
Audio Screens (No Speakers): DIY-ready speaker pods molded with mesh speaker grilles included—ready for you to source and install your own 4" speakers.

Fulfillment & Shipping Lead Times:

Standard Raw ABS: Ships in 1 business day.
Painted: Ships in 3 business days.
Upholstered Fabric Variants: Ships in 2 weeks.

Frequently bought together:

Important Notes & Pro Tips

Install Before Paneling: For best results, install this entire kit before hanging your final ceiling and wall panels so they can rest on a perfect plane and slide cleanly behind the integrated flanges. Post-panel installations are possible but may require custom trimming.
Tuck Under Front Weather Stripping: When positioning the passenger-side front B-pillar cover, use a finger or trim tool to pull the rubber door weather stripping over the edge of the trim piece—tucking the flange underneath—before drilling or fastening.
Pre-Drill Hardened Steel: You must pre-drill pilot holes through the front B-pillar flanges and bulkhead area using the included 1/8” drill bit. The Transit B-pillars and ceiling strut are made of hardened steel, so self-tapping screws cannot pierce the metal on their own; pre-drilling is required. Secure the B-pillars with the 1" screws and the bulkhead with 3 to 5 of the 1-1/4" screws.
Bulkhead Tape Adhesion: For the center bulkhead piece, peel the protective film off the pre-applied double-stick tape and press the upper edge firmly into the roof top for a tight, rattle-free seal.
Set Rear Rivnuts: For the rear D-pillar section, position the overhead and vertical panels to mark your mounting hole locations. Drill the marked holes to 23/64”, install the provided 1/4-20 rivnuts into the frame, and secure using the provided bolts (two for overhead, five per side for verticals). A drop of thread locker (like Loctite) is highly recommended on all rear bolts.
Anchor the Rear Bottom: Complete the rear installation by threading one 3/8-16 bolt directly into the existing factory threaded holes at the bottom of both the driver and passenger sides.

Account