Tec Vanlife 2019+ Sprinter Sliding Door Storage Step

$299.00 USD

Tec Vanlife 2019+ Sprinter Sliding Door Storage Step

Name: Tec Vanlife 2019+ Sprinter Sliding Door Storage Step
Brand: RoamLabX
SKU: I-FL-T-STP
Price: 299.00 USD
Availability: InStock

$299.00 USD

Shipping Calculated at Checkout

The Tec Vanlife 2019+ Sprinter Sliding Door Storage Step finishes off your camper van's entryway while adding valuable hidden storage space. Precision 3D-engineered to drop directly into the passenger-side sliding door stepwell, this heavy-duty step features a wide upper flange that cleanly overlaps subflooring edges between 1/2" and 1 1/4" thick. Finished in a rugged, wear-resistant powder coat, it provides a stable entry platform and houses a built-in 24" x 8" x 6" storage cubby for shoes, tools, leveling blocks, or recovery gear.

Integrated Under-Step Storage Cubby: Features a built-in 24" L x 8" W x 6" D compartment to keep shoes, small tools, power cords, or camp essentials organized and out of the main walkway.
Clean Subfloor Edge Trim: Designed with a wide upper flange that neatly covers raw flooring edges, accommodating subfloor thicknesses from 1/2" to 1 1/4" for a factory-finished transition.
3D-Engineered Stepwell Fit: Contoured specifically for the VS30 Sprinter sliding door opening to deliver a tight, rattle-free fit and a sturdy stepping platform.
Powder-Coated Stainless Steel Construction: Built from heavy-duty stainless steel and finished in a tough, textured powder coat that resists wear and tear from daily van use.
Flexible DIY Installation: Drops cleanly into the factory stepwell and can be secured using either high-strength silicone adhesive or mechanical bolts to suit your build preferences.

Chassis & Model Years: Mercedes-Benz Sprinter (VS30 platform, model years 2019 to present).
Subfloor Compatibility: Fits builds with 1/2" to 1 1/4" total floor thickness directly (compatible with thicker floors using shims and lower trim).
Mounting Position: Passenger-side sliding door stepwell.
Body Configurations: Compatible with standard/low-roof and high-roof models across 144", 170", and 170" Extended wheelbases.
RV Conversions: Fits 2019+ Sprinter chassis conversions (verify existing step trim and subfloor height prior to installation).

[1] Tec Vanlife Sliding Door Storage Step (Powder-Coated)

(Note: Mounting adhesive or bolts are not included so builders can choose their preferred installation method)

Overall Dimensions: 54.0" L x 10.0" W x 6.5" H
Storage Cubby Dimensions: 24.0" L x 8.0" W x 6.0" D
Material: Stainless Steel
Finish: Textured Powder-Coated Finish
Supported Floor Thickness: 0.5" to 1.25" (1/2" to 1 1/4") standard
Mounting Location: Passenger-Side Sliding Door Stepwell

Frequently bought together:

Important Notes & Pro Tips

Factory Door Width Variance: Due to manufacturing tolerances in Mercedes-Benz Sprinter sliding door frames,opening widths can vary by up to 22 mm. While most steps drop right in without issue, narrower door openings may require minor edge trimming for a flush fit.

Weather Seal Clearance: Test-fit the step before final fastening. If the outer corner contacts the rubber weather seal around the sliding door, lightly grind or file the corner down to create sufficient clearance.

Subfloors Thicker Than 1 1/4": If your insulated subfloor exceeds 1 1/4" in height, place shims between the bottom of the storage step and the factory stepwell for solid structural support, and add a trim strip to bridge the gap beneath the lower lip.

Fastening Options: For a quick, clean install, apply a generous bead of automotive or marine-grade silicone adhesive underneath the step. For permanent mechanical retention, bolt the step directly to the factory stepwell (always inspect underneath the van for fuel lines, wiring harnesses, or tanks before drilling, and treat bare metal holes with rust-inhibiting primer).